Nothing ruins a weekend like a mower that refuses to start or a handle that wobbles loose. You pull the cord, the engine coughs, and you’re left staring at a broken recoil starter or a frayed throttle cable. Identifying the correct Yardman Push Lawn Mower Parts is the fastest way to get back to mowing without buying a whole new machine. Many homeowners face this exact frustration when their push mower starts acting up after a few seasons of heavy use. The good news is that most common failures involve simple, replaceable components that are widely available. You don’t need to be a mechanic to fix these issues, but you do need the right part number. A mismatched component can lead to poor performance or even damage to other parts of your mower. That’s why careful analysis of your specific model is so important before you hit the buy button.
Before you order, take a moment to locate the model and serial number on your mower’s frame. This step saves you from the disappointment of receiving a part that doesn’t fit. The products listed below cover a range of common issues, from recoil starter assemblies to mulching blades and handle hardware. Each option is designed to replace specific OEM parts, ensuring compatibility with popular brands like MTD, Troy-Bilt, and Craftsman. You’ll find that investing in a quality replacement part often extends the life of your mower significantly. It’s a small cost compared to the price of a new unit. Check the specifications carefully to ensure the part matches your engine and deck size. This attention to detail makes the difference between a quick fix and a costly mistake. Understanding blade compatibility is just as critical as choosing the right starter or cable.
Pros
- Affordable alternative to OEM replacement parts
- Fits a wide range of common push mower brands and engine models
- Simple to install with basic tools and minimal mechanical skill
Cons
- Aftermarket part may not have the exact same fit or durability as OEM
- Limited to specific engine models; compatibility should be double-checked before purchase
- May require some trial and error during installation if the mower has slight variations
The Poweka Recoil Starter Assembly is a practical replacement part for owners of MTD, Cub Cadet, Troy Bilt, and Yardman push mowers. If your mower's pull start has snapped or stopped retracting, this aftermarket assembly offers a cost-effective way to get it running again. It's designed for several common Powermore engine models, including 1P61P0, 1P65LHA, 2P70M0B, 5P65M0A, 5P70M0A, and 5P70ML.
Performance-wise, this starter assembly is meant to restore the original starting function. Based on product specifications and user feedback, it provides a solid pull and reliable retraction, letting you start your mower without hassle. It won't improve cutting or mulching performance, but it's a critical component for daily use. Many homeowners may prefer this budget-friendly fix over buying a new mower or paying for shop repairs.
Build quality appears decent for an aftermarket part. The housing is made of durable plastic, and the spring and rope are designed to withstand regular starting cycles. While it may not match the longevity of an OEM part, it offers good value for the price. The assembly comes ready to install, though you may need to transfer some hardware from your old starter.
Installation is straightforward for anyone comfortable with basic tools. You'll need to remove the old starter, attach the new one with the same bolts, and route the rope through the handle. Some users find that the rope length or handle design differs slightly from the original, but it's usually easy to adjust. No special maintenance is needed beyond keeping the area clean and occasionally checking for wear.
A realistic limitation is that this is an aftermarket part, so fit may not be perfect on every mower variant. Double-check compatibility with your specific engine model before ordering. Also, if your mower has other starting issues (like a faulty flywheel key or compression problems), this replacement won't solve those. It's strictly for a broken or worn-out recoil starter.
Overall, the Poweka Recoil Starter Assembly is a smart buy for budget-conscious homeowners who want to keep their push mower running. It's an easy DIY fix that saves money and extends the life of your equipment. If you're comfortable with basic repairs and your mower matches the listed engine models, this part may be just what you need.
Pros
- Broad compatibility with many popular lawn mower brands and models.
- Simple hinged design makes installation and removal tool-free.
- Helps produce fine mulch that returns nutrients to the soil.
- Affordable price compared to buying a dedicated mulching mower.
Cons
- Only fits 21-inch mowers with the specific chute opening – not universal.
- Some users may need to verify exact model compatibility before purchase.
- No reviews available yet to confirm long-term durability.
The yewposy hinged mulch plug (part number 987-02516A) is a simple yet effective accessory for homeowners who want to turn their existing 21-inch lawn mower into a mulching machine. Instead of buying a separate mower or constantly switching between bagging and side discharge, this plug blocks the grass discharge chute, forcing clippings to circulate under the deck for finer cutting. It's designed to fit a wide range of MTD, Troy-Bilt, Craftsman, Cub Cadet, and Yard Machines mowers built from 2010 onward.
When it comes to performance, the mulch plug helps create a fine, even mulch that settles into the lawn rather than clumping on top. Based on product specifications, the hinged design allows you to quickly flip the plug open or closed without tools – handy when you want to switch between mulching and bagging for different seasons or grass conditions. Many homeowners may find this especially useful during fall leaf cleanup or spring's fast growth.
Build quality appears solid for a plastic accessory. The black material is thick enough to resist warping from sun exposure or impact with debris. It's lightweight, which means it won't add noticeable weight to the mower, and the hinge mechanism feels sturdy enough for regular use. However, as this is a new product with no customer reviews yet, long-term durability is unproven – but similar aftermarket plugs often hold up well for several seasons.
Installation is straightforward: you simply remove the existing discharge chute cover or deflector, snap the mulch plug into the opening, and secure it with the provided hardware (if any). Most compatible mowers have a dedicated slot for a mulch plug, so it should fit snugly. Storage is easy – the plug is small enough to toss in a garage drawer or hang on a pegboard.
A realistic limitation is that this plug only works on mowers with the exact chute shape and mounting points listed in the compatibility chart. If your mower isn't on the list or has a different chute design, it won't fit. Also, because it's a third-party part, fitment may vary slightly from OEM versions. Some users might need to trim or adjust the plug for a perfect seal, though the product description suggests direct compatibility.
Overall, the yewposy hinged mulch plug is a practical, budget-friendly solution for homeowners who already own a compatible 21-inch mower and want to add mulching capability. It's especially suitable for suburban lawns where fine clippings are preferred for natural fertilization. If you're tired of raking or bagging leaves and grass, this little accessory could save you time and effort – just double-check your mower's model number before buying.
This yewposy mulch plug is designed to replace OEM part numbers 987-02516A, 987-02516, 687-02516, 687-02516A, 68702516, and 98702516. It fits many MTD, Troy-Bilt, Craftsman, Cub Cadet, and Yard Machines 21-inch walk-behind mowers. Key compatible models include MTD 11A-B0BL765, 11A-B0S5700, 11A-B0BL700, 11A-A2S5700, 12A-A0BE700, 11A-A00X700, 12A-A0M5700, and many more. For Troy-Bilt, it fits TB110, TB1100, TB130, TB210, TB230, TB250, TB260, TB270ES, TB280ES, TB320, TB330XP, TB350XP, and specific 2010-2011 model numbers. Craftsman models from the 247.37xxx series are also compatible. Always verify your mower's model number against the full list in the product description before purchasing.
Installation typically takes less than 5 minutes. First, ensure the mower is off and the spark plug is disconnected for safety. Remove the existing side discharge chute or deflector (if present). Align the mulch plug with the chute opening and press it in until it clicks or snaps into place. Some mowers may require you to slide a retaining pin or screw. No special tools are needed. To switch back to bagging or side discharge, simply release the plug and remove it. The hinge allows you to flip it out of the way without full removal on some models.
Pros
- Very affordable compared to OEM parts
- Compatible with many popular mower models
- Easy to install with reused screws
- Solid plastic build should hold up well
- Restores safe operation by directing clippings away from the operator
Cons
- Does not include mounting screws, so you must reuse old ones or buy separately
- Not compatible with some specific model years (e.g., 12AEB2JA001 2011, 12AVD39Q701 2011) - double-check your serial number
- Some users may find the fit slightly loose or tight depending on mower age and wear
If your 21-inch push mower's side discharge chute has cracked, broken, or gone missing, the Deckman 731-07486 replacement is a practical and budget-friendly solution. This black plastic chute is designed to fit a wide range of Craftsman, Columbia, Huskee, Troy-Bilt, Yard-Man, and MTD models, including popular series like TB110, TB130, TB220, TB230, and many 11A and 12A models. For homeowners who prefer side discharge over bagging or mulching, this part restores the mower's original safety feature, directing clippings away from the operator and nearby objects.
In terms of performance, the chute does exactly what it's supposed to do: it channels grass clippings out the side of the deck in a controlled stream. The 11-inch hypotenuse and 3.4-inch height match the dimensions of many OEM chutes, so you can expect a similar clipping pattern. Just keep in mind that the fit may vary slightly depending on your mower's exact model year and deck condition. Some users report a snug fit, while others find it a bit loose—but in most cases, it stays securely in place during mowing.
Build quality is decent for the price. The plastic feels sturdy enough to withstand normal impacts from rocks, roots, and yard debris. It won't rust like metal parts, and its black color resists fading from UV exposure. That said, it's still a plastic component, so it may eventually crack if you hit something really hard or leave it out in extreme cold for long periods. For the typical suburban lawn with occasional sticks and stones, it should hold up well over several seasons.
Installation is straightforward: just remove the old chute (if still attached), then line up the new one with the deck opening and reuse the screws from the original part. The product does not come with screws, so don't lose those. Most homeowners can complete the swap in under 10 minutes with just a screwdriver or nut driver. No special tools or mechanical skills are required.
The main limitation is compatibility—while this chute fits many mowers, it does not work with certain specific models like the 12AEB2JA001 (2011) or 12AVD39Q701 (2011). Always double-check your mower's model and serial number against the list provided by the seller before buying. Also, because the chute relies on reused screws, if your old ones are rusted or stripped, you'll need to source replacements separately.
Overall, the Deckman 731-07486 side discharge chute is a smart, low-cost fix for a common mower problem. It's ideal for budget-conscious homeowners who want to keep their existing mower running safely without spending on a whole new deck or mower. Just verify compatibility before purchase, and you'll be back to mowing in no time.
Pros
- Easy to install – zip ties included and clear fitment info makes it a DIY-friendly job
- Durable materials (rubber outer, stainless steel inner) hold up against lawn debris and moisture
- Wide compatibility covers popular Troy Bilt TB series, Craftsman M230/M260, MTD Yard Machines, and more
- Very affordable at under $10, so it’s an economical fix for a common mower problem
Cons
- May not fit all mowers – precise compatibility check with your model number is essential before ordering
- Cable length might be slightly longer than original on some mowers, requiring careful cable routing to avoid snagging
- No instruction manual included – some users might need to watch a YouTube tutorial for guidance
If your self-propelled gas mower struggles to stay running or the throttle lever feels loose, the XIKOBY 946-04661A control cable could be the simple fix you need. This replacement throttle cable is designed to fit a wide range of 21-inch push mowers from Troy Bilt, Craftsman, MTD, and other brands using Briggs & Stratton engines in the 140cc to 190cc range. It’s an ideal solution for homeowners who want to keep their current mower going instead of spending hundreds on a new one.
Performance-wise, the cable’s main job is to reliably connect the throttle lever to the engine’s carburetor, and based on the product specs, it’s built to do just that. The inner wire is stainless steel to resist corrosion, while the outer conduit is coated rubber to withstand outdoor conditions. The 51-inch overall length and 37.5-inch conduit provide plenty of reach for most mower decks, and the Z-type ends on both sides snap into place securely. For the money, you get a cable that should restore smooth throttle operation and help your mower run at the right speed.
When it comes to installation, the product description highlights that the cable comes with zip ties, which is a nice touch for easy routing and fastening. Many users find replacing a throttle cable to be a straightforward DIY project—just remove the old cable, route the new one following the same path, connect the ends, and zip-tie it in place. No special tools are needed, though you may want to take a photo of the original routing before starting.
Durability is a key concern with any outdoor equipment part, and this cable uses rubber and stainless steel materials that should hold up well against moisture, grass clippings, and temperature changes. While we don’t have long-term user reviews yet, the construction suggests it can handle regular mowing seasons without premature failure. The included zip ties also help keep the cable secure and protect it from rubbing against sharp edges.
A realistic limitation is that this cable is not a one-size-fits-all part. You must verify that your mower model is listed in the compatibility details. Some users may find that the cable is a bit longer than the original, which can require creative routing to avoid slack getting caught in moving parts. Also, since the product has no user reviews yet, it’s a good idea to check the return policy before purchasing.
Overall, for less than ten dollars, the XIKOBY control cable is a practical, low-risk investment for anyone with a compatible Troy Bilt, Craftsman, or MTD mower that needs a throttle cable replacement. It’s an affordable way to extend your mower’s life and avoid the hassle of hauling it to a repair shop. If your model is listed, this cable is worth a shot.
Pros
- Compatible with a wide range of mower models from MTD, Cub Cadet, Troy-Bilt, and Craftsman
- Sharpened and powder coated for immediate use and long-term rust protection
- Made in the USA, which may appeal to buyers seeking domestic manufacturing
- Affordable price point for a replacement blade that restores mulching efficiency
Cons
- Must match current blade OEM number to ensure exact fit, which may require checking compatibility
- Powder coating will wear off after first cut, so initial appearance may not reflect final sharpness
- Only includes one blade, not a set, so multiple purchases needed for dual-blade mowers
The Maxpower 331528B is a 21-inch mulching blade designed as a direct replacement for many MTD, Cub Cadet, Troy-Bilt, and Craftsman mowers. It’s a simple, practical solution for homeowners who want to keep their mower cutting cleanly without spending a lot. If you’ve noticed your mower leaving clumps or uneven cuts, swapping in a fresh blade like this one can make a noticeable difference.
In terms of real-world performance, this blade is sharpened during manufacturing and then powder coated for protection. That coating comes off during the first cut, revealing a precision-sharpened edge. For mulching, it’s designed to lift and recut grass clippings into fine particles that decompose quickly. Many users find it restores the mulching capability of their older mower without needing a full deck replacement.
Build quality is solid for the price. The blade is made in the USA from what feels like durable steel. The powder coating helps prevent rust during storage or shipping, though it will wear off after a few uses. That’s normal and doesn’t affect cutting performance once the coating is gone. The center hole uses a bow tie pattern with a 5/16-inch outer hole diameter and 2.5-inch center-to-center spacing, which fits many common mower models.
Setup is straightforward if you’ve changed a mower blade before. You’ll need to match your current blade’s OEM number to ensure a proper fit—Maxpower lists several compatible numbers like 742-0741 and 942-0641. The blade weighs about 1.6 pounds, so it’s easy to handle during installation. Just remember to disconnect the spark plug and secure the mower before working under the deck.
One realistic limitation is that this blade won’t fit every mower, even if the brand matches. Always double-check your OEM number before buying. Also, the powder coating might initially make the blade look dull, but that’s cosmetic. Some users note that the coating can leave a slight residue on grass for the first cut, but it washes off quickly.
Overall, the Maxpower 331528B is a reliable, budget-friendly replacement blade for common mower brands. It’s especially good for homeowners who want to restore mulching performance without paying for a premium brand. If you’re comfortable with basic mower maintenance, this blade is a solid choice for keeping your lawn looking tidy all season.
Pros
- Durable materials resist rust and breakage, ideal for outdoor use.
- Simple tool-free installation with triangular nut design.
- Complete set includes two sets of knobs, bolts, and nuts.
- Affordable price for a practical lawn mower repair.
- Universal compatibility with many mower models (check size).
Cons
- Requires measuring screw hole size to confirm fit; may not work on all mowers.
- Only two sets included; may need additional sets for multiple mowers or equipment.
- Plastic knobs may not be as durable as all-metal alternatives under heavy use.
The FOJOO Lawn Mower Handle Knob, Bolts & Replacement Screws Kit is a practical accessory for any homeowner dealing with loose or broken handle fasteners on their push mower or outdoor power equipment. This kit is specifically designed for those who want a quick, no-fuss fix without replacing the entire handle assembly. It's a budget-friendly solution that can save you from mid-season breakdowns.
Based on product specifications, the kit includes two sets of knobs, bolts, and nuts made from reinforced ABS plastic and galvanized iron. The triangular nut design allows for manual installation and tightening without any tools, making it easy to secure the handle in minutes. This is especially useful for homeowners who want to avoid complicated repairs and get back to mowing quickly.
The build quality of these components is meant to withstand frequent outdoor exposure. The galvanized iron bolts resist rust, while the reinforced ABS plastic knobs are sturdy and less prone to brittleness compared to standard plastic. This combination offers a balance of durability and ease of use, suitable for typical lawn care conditions.
Installation is straightforward: simply remove the old screws, align the new bolt with the handle holes, and tighten the knob by hand. The triangular nut design provides a secure grip without slipping. Since the kit includes two sets, you can replace both sides of the handle at once, ensuring balanced support.
One limitation to note is that the bolts have a diameter of 7.74mm and a length of 47mm. You need to measure the screw hole size on your mower handle before ordering to ensure compatibility. While the kit fits many models, it may not work for all makes or older equipment. Additionally, the plastic knobs, though durable, may not offer the same long-term reliability as all-metal parts on heavy-duty or commercial mowers.
Overall, this FOJOO kit is a practical and affordable replacement option for homeowners looking to fix loose mower handles. It's especially good for those who want a simple, tool-free solution without spending much. If you have a push mower or similar equipment with standard handle bolts, this kit is worth considering for your lawn care toolkit.
Installing the FOJOO Lawn Mower Handle Knob, Bolts & Replacement Screws Kit is a simple process. First, remove the old screws or knobs from your mower handle. Align the new bolt through the handle holes. Place the triangular nut on the opposite side and tighten the knob by hand. No tools are needed. Make sure the handle is securely fastened before using the mower. The whole process takes just a few minutes per side.
Pros
- Affordable price point – great value for a simple, effective repair solution
- Tool-free installation saves time and hassle during maintenance
- Corrosion-resistant hardware built to withstand moisture and outdoor use
- Includes both long and short bolts to fit a variety of handle designs
Cons
- Limited compatibility – you must verify the hole diameter of your equipment before purchase
- Plastic knobs may feel less premium than metal alternatives, though they are durable enough for typical use
- Only includes two knobs and four bolts – may not cover all handle mounting points on some larger machines
The ELIFEPARTS Lawn Mower Handle Knob Bolt Kit is a straightforward, budget-friendly replacement solution for anyone dealing with loose or broken handle fasteners on their outdoor power equipment. This set includes two universal T-handle knobs along with two long bolts (5.2cm) and two short bolts (2.95cm), designed to fit most lawn mowers, snow blowers, and similar machines. For homeowners who need a quick fix without a trip to the repair shop, this kit offers a practical way to restore handle stability and safety.
Installation is about as easy as it gets – the wing-style knobs allow you to tighten them by hand, no tools required. This is especially handy if you're out in the yard on a Saturday morning and notice a wobbly handle. Simply align the knob with the bolt, hand-tighten until secure, and you're back to mowing. The kit includes two bolt lengths to accommodate different handle thicknesses, so you can choose what fits best for your specific machine.
Build quality is decent for the price. The knobs are made from hard plastic, which feels sturdy enough for regular use, while the bolts are galvanized iron to resist rust and corrosion. This combination should hold up well under typical outdoor conditions – rain, humidity, and the occasional splash from a garden hose. Just make sure to check the hole diameter of your equipment before ordering, as compatibility depends on that measurement.
Storage is a non-issue – the entire kit weighs only 0.18 pounds and comes in a small package that can easily be stashed in a garage drawer or tool shed. It's a great spare part to have on hand for emergency repairs, especially during peak mowing season or before winter snow removal. The kit also serves as a direct replacement for several OEM parts (like #689-00600, #106-4161, #92-2260), making it a reliable option if you're replacing worn-out original hardware.
On the downside, the plastic knobs may not feel as premium as all-metal alternatives, but they are still durable enough for typical homeowner use. Additionally, if your equipment has more than two handle mounting points, you may need to purchase multiple kits. Overall, this is a solid, cost-effective solution for fixing loose handles – perfect for budget-conscious homeowners, first-time mower owners, or anyone who wants a simple, tool-free repair.
If you're tired of dealing with a shaky mower handle or need a quick fix for your snow blower, the ELIFEPARTS Handle Knob Bolt Kit is a smart, low-cost choice. It's easy to install, built to last outdoors, and backed by a reputation for reliable fitment. Just remember to measure your handle holes before buying to ensure a proper fit.
Frequently Asked Questions
How do I verify the correct part number?
Always cross-reference your mower’s model and serial number with the product description. Manufacturers often change part numbers between production years, so a generic fitment list might not be enough. Double-checking this information prevents returns and ensures the part installs correctly. This simple step saves you time and money in the long run.
Are these parts compatible with all push mowers?
No, they fit specific models listed in the description. You must match your serial number to the compatibility list provided by the seller. Universal parts like handle knobs may fit more models, but engine-specific parts like starters and blades require exact matches. Always verify before purchasing to avoid installation issues.
Can I install a mulching blade on any mower?
Only if your mower is designed for mulching and the blade dimensions match. A standard side-discharge deck may not handle the airflow needed for mulching. Check your owner’s manual to see if your model supports a mulching blade. Using the wrong blade can cause excessive vibration or damage the deck.
What should I do if the recoil starter is stuck?
A stuck starter often indicates a worn spring or damaged housing. Replacing the entire assembly is usually the most reliable fix. Look for a replacement that matches your engine model, such as the Poweka option listed above. This ensures the spring tension and gear alignment are correct for smooth starting.
How often should I replace handle knobs and bolts?
Replace them if they crack, strip, or loosen frequently. Outdoor exposure causes plastic to become brittle and metal to corrode over time. A secure handle is essential for safe operation and control. Regular maintenance helps identify these wear points before they become safety hazards.


Write Your Review
No reviews yet. Be the first to share your experience!