Ages 18-24? Explore Prime for Young Adults and see if you are eligible

Keep a compatible chain and bar ready for your next cut

A dull chain can leave rough cuts and make routine limb cleanup feel like a slog. Parts for an older saw can be tricky to match, too: bar length alone doesn’t tell you whether the pitch, gauge, and drive-link count fit. This roundup of john deere chainsaw 55v parts includes chain loops, bar-and-chain combinations, clutch sprockets, and an operator’s manual, so you can compare the details before buying.

The listed options vary in useful ways. The DatsenAAA 20-inch bar-and-chain combo names the 55V among its compatible saws, while the UpStart Components chain packs specify a 16-inch length, 3/8-inch low-profile pitch, .050-inch gauge, and 60 drive links. Another DatsenAAA listing is a three-chain 24-inch set with 3/8-inch pitch, .050-inch gauge, and 81 drive links. Those specifications aren’t interchangeable. Check your existing bar and saw requirements first, and consult the lawn equipment service guide if a repair needs qualified attention. This page covers chainsaw parts, not lawn mower cutting decks or drive systems.

Sprocket listings offer another fitment choice: one package includes 3/8-inch and .325-inch, seven-tooth rims, while another is a single 3/8-inch, seven-tooth spur sprocket. The TriLink chain specifies 66 drive links, which differs from the 60-link UpStart loops. Product descriptions provide compatibility claims, not a guarantee for every saw configuration, so match part numbers and specifications rather than relying on the model name alone. The roundup also includes a manual and a toy, which serve different needs from repair parts.

FAQs

Which chain size fits a John Deere 55V?

There isn’t one chain size guaranteed for every 55V setup. The listed 16-inch chains specify 3/8-inch low-profile pitch, .050-inch gauge, and 60 drive links, while other listings describe different bar lengths or link counts. Confirm the markings on your bar and the saw’s requirements before ordering.

Does a 20-inch replacement bar and chain fit the 55V?

The DatsenAAA listing names the John Deere 55V as a compatible model for its 20-inch bar-and-chain combo. Still, verify bar mount, pitch, gauge, and drive links against your saw before purchase, since configurations can vary.

What is the difference between the 55V sprocket options?

One Hujago package includes a clutch rim sprocket plus 3/8-inch and .325-inch, seven-tooth rims. The other listing is a 3/8-inch, seven-tooth clutch spur sprocket. Check the part number and sprocket style required by your saw before choosing.

Can I use the 24-inch chain replacement on a 55V?

The DatsenAAA listing names the 55V and specifies a 24-inch chain with 3/8-inch pitch, .050-inch gauge, and 81 drive links. Use it only if those specifications match the bar and saw configuration you have.

Should I buy a multi-pack of 16-inch chains?

A multi-pack can keep compatible replacement loops on hand, but pack size doesn’t resolve fitment. The UpStart 2-, 4-, and 6-pack listings specify the same 16-inch, 60-link chain dimensions, so compare your saw’s required pitch and gauge before selecting a pack. For mower-related maintenance questions, see this guide to lawn mower bagger fit and use.